- Cin - Cinelerra-GG Mailing Lists

edl into ffmpeg cuts
by Andrew Randrianasulu 12 Nov '21

12 Nov '21

it says Premiere edl, but I hope our cmx3600 edl will work too? https://gist.github.com/seriousm4x/b5f795d7058f4e831270b047e25c3b9e req. python3

1 0

Add-timecode-to-output-mov-mxf.patch
by Phyllis Smith 11 Nov '21

11 Nov '21

Andrea/Andrew: > The 0030-Add-timecode-to-output-mov-mxf.patch works and introduces > timecode in both mov and mxf and also in mp4 (instead it doesn't work in > mkv). Thanks! I propose to put this patch in git. > It is a good idea but I tested it and it works and shows up in mediainfo BUT there is an error message that is a problem and I do not understand. Maybe Andrew can look at this as shown below where the new lines and error (codec open failed) is in BOLD as shown on the startup window. *AFTER 0030* ... Cinelerra is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. There is absolutely no warranty for Cinelerra. ... *tc: 0.000000* Render::render_single: Session finished. ** rendered 2713 frames in 7.326 secs, 370.325 fps *FFMPEG::scan: codec open failed* *FFMPEG::scan:file=/tmp/junafter.mp4* audio0 pad 32 0 (32) BEFORE 0030 ... Cinelerra is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. There is absolutely no warranty for Cinelerra. ... Render::render_single: Session finished. ** rendered 2713 frames in 9.759 secs, 278.000 fps audio0 pad 32 0 (32)

2 1

crash
by Andrea paz 10 Nov '21

10 Nov '21

I tried to make a build from git: the compilation happens without errors (see cin5.log), but when I start CinGG I get a crash. No dumps are formed. At the terminal I have only these lines: build ladspa plugin index for: /home/paz/cinelerra5/cinelerra-5.1/bin/ladspa MWindow::init_ladspa_plugins: can't create ladspa plugin index: /home/paz/.bcast6/ladspa_plugins._home_paz_cinelerra5_cinelerra-5.1_bin_ladspa MWindow::init_theme: prefered theme Cakewalk not found. MWindow::init_theme: theme_plugin not found. unjoined tids / owner 1 00007feefd7fa640 / 00007fef46622fc0 12BC_Clipboard I had no problems with the November 1 version.

3 6

small note on documentation
by Andrew Randrianasulu 07 Nov '21

07 Nov '21

may be page https://cinelerra-gg.org/download/CinelerraGG_Manual/Tips_Improving_Smaller… in section where it talks about speeding up ffmpeg plugins can benefit from direct link to specific section? https://cinelerra-gg.org/download/CinelerraGG_Manual/Speed_up_Ffmpeg_plugin… also, I think usual _decoding_ tricks like lowres and skiploopfilter might work in opts files? (need to doublecheck)

2 1

article about making flatpack
by Andrew Randrianasulu 06 Nov '21

06 Nov '21

https://opensource.com/article/19/10/how-build-flatpak-packaging conceptually sounds nearly simple enough to try (because Cin usually builds statically), but sandboxing might give some surprizes....

2 2

extreme offtopic, but: apparently only one video editor for Atari!
by Andrew Randrianasulu 05 Nov '21

05 Nov '21

Mac was famous for first professional (avid/1) and consumer (Adobe Premiere) NLEs, Amiga was famous for specialized video editing hardware (Video Toaster) or whole new clone (Draco), but apparently even Atari (also m68k based computer) had some promising program in late 90x? https://vanel.net/tntmag/mounta12.htm {author seems to be French, so most up to date info in fr??} You probably can try to lauch this in hatari (atari emulator) running EmuTOS? No support for audio, and as you can guess from screenshot only some cinepack quicktime videos will work as input (not counting more obscure animation formats) But might be fun to poke in your free time (if you have such thing! I seriously hope you have!)

2 1

libaom 3.2.0
by Andrew Randrianasulu 01 Nov '21

01 Nov '21

https://aomedia.googlesource.com/aom/+/refs/tags/v3.2.0/CHANGELOG --- This release includes compression efficiency and perceptual quality improvements, speedup and memory optimizations, as well as some new features. - New Features * Introduced speeds 7, 8, and 9 for all intra mode. * Introduced speed 10 for real time mode. * Introduced an API that allows external partition decisions. * SVC: added support for compound prediction. * SVC: added support for fixed SVC modes. - Compression Efficiency Improvements * Intra-mode search improvement. * Improved real time (RT) mode BDrate savings by ~5% (RT speed 5) and ~12% (RT speed 6). The improvement was measured on the video conference set. * Improved real time mode for nonrd path (speed 7, 8, 9): BDrate gains of ~3-5%. * Rate control and RD adjustments based on ML research in VP9. Gains of ~0.5-1.0% for HD. - Perceptual Quality Improvements * Added a new mode --deltaq-mode=3 to improve perceptual quality based on a differential contrast model for still images. * Added a new mode –deltaq-mode=4 to improve perceptual quality based on user rated cq_level data set for still images. * Weighting of some intra mode and partition size choices to better manage and retain texture. - Speedup and Memory Optimizations * Further improved 2-pass good quality encoder speed: o Speed 2 speedup: 18% o Speed 3 speedup: 22% o Speed 4 speedup: 37% o Speed 5 speedup: 30% o Speed 6 speedup: 20% * Optimized the real time encoder (measured on the video conference set): o RT speed 5 speedup: 110% o RT speed 6 speedup: 77% - Bug Fixes * Issue 3069: Fix one-pass mode keyframe placement off-by-one error. * Issue 3156: Fix a bug in av1_quantize_lp AVX2 optimization. --- I quickly re-packed .tar.gz into xz and renamed libaom patches accordingly. It seems to work with ffmpeg-4.4. Phyllis, can you test (may be next month?) if libaom-3.2.0 still works on both new and old distros (as you use them for appimage build)? Also, ffmpeg 4.4.1 was released - mostly bugfixes from fuzzers, it seems, but also few changes in util https://git.ffmpeg.org/gitweb/ffmpeg.git/blob/7e0d640edf6c3eee1816b105c2f74… https://git.ffmpeg.org/gitweb/ffmpeg.git/tag/2aa4f5cc8be5e3168191cd13a61178…

2 4

New presets for DNxHR in mxf
by Andrea paz 27 Oct '21

27 Oct '21

I thought about implementing the various DNxHRs in the mxf format, which is their natural format (Andrew had already started with the proxy). Those already present as mov can be left or removed; I would leave them.

2 2

cinelerra HV 7.4
by Andrew Randrianasulu 26 Oct '21

26 Oct '21

10/21/21 - Cinelerra 7.4 Load a nested EDL without pasting it. Swap an asset for a nested EDL. Change the frame rate of a nested EDL. Transparency checkerboard. Change parameters of a single edit with text entry. Checks for recursive nested EDLs. Memory management bugfixes http://www.heroinewarrior.com/cinelerra.php

3 2

Run And Integrate Cinelerra AppImage With AppImageLauncher
by Terje J. Hanssen 23 Oct '21

23 Oct '21

The README appimage file describes the CLI method to install Cinelerra-GG 1) download AppImage file move from Download folder to your preference 2) make it executable chmod u+x {AppImageFile name} 3) run it ./cinelerraGG.AppImpage -------------------------------- Now I have also tried the /GUI method/ to download, Run And Integrate Cinelerra AppImage with installed *AppImageLauncher*. On openSUSE Leap 15.3 (and surely similar on other distros) AppImageLauncher is integrated with Firefox as follows: 1) start download the AppImage file, and a widget popup in Firefox with the option to open it with AppImageLauncher (instead of Saving it) 2) At the end of the download a new popup asks to integrate it with your desktop system. OK -------------------------------- (The AppImage installation directory is /home/user/Application by default, but can be customized in the Launcher widget) That's it. Both *Cin* and *Cin-multi* were installed this way, automatic integrated with icons and in the app-menue in Gnome, see the attached screenshot AppImage.png and urls to articles for detailed info below. I have used *alacarte* to add the icon comment sub-text to *Cin-multi* for multiple bit version.the icon, as also mentioned in a previous post AppImage and Desktop Integration with an app launcher https://www.mail-archive.com/cin@lists.cinelerra-gg.org/msg02692.html Packages I installed first on Leap 15.3 zypper se -is appimage Loading repository data... Reading installed packages... S | Name | Type | Version | Arch | Repository ---+------------------+---------+-------------------------------------+--------+------------------ i+ | appimaged | package | 9~pre.1495805837.d05eac1-bp153.1.16 | x86_64 | Main Repository i+ | appimagelauncher | package | 2.2.0-travis995~0f91801 | x86_64 | (System Packages) appimaged Daemon handles (un)registering AppImages with the system appimaged is a daemon that handles registering and unregistering AppImages with the system (e.g., menu entries, icons, MIME types, binary delta updates, and such). The package comes also with appimage.validate CLI tool to verify signature of AppImage files. Version 9~pre.14958... Size 36.5 KB openSUSE Leap 15.3 AppImageLauncher generic https://www.linuxuprising.com/2018/04/easily-run-and-integrate-appimage-fil… https://blog.desdelinux.net/en/appimagelauncher-easily-runs-and-integrates-… https://github.com/TheAssassin/AppImageLauncher AppImageLauncher openSUSE: https://cubiclenate.com/2020/01/09/appimagelauncher-appimage-manager-on-ope… https://software.opensuse.org/package/appimaged https://tutorialforlinux.com/2019/12/27/step-by-step-appimagelauncher-opens… Terje

7 21